.png){kind=icon}
Carolina Flooring Specialists installs epoxy floor coatings for homes and businesses in Wade Hampton, SC: basements, workshops, laundry and storage rooms, retail and shop floors, ground back to sound concrete and sealed under a UV-resistant polyaspartic clear coat.
.jpg)
%20copy.jpg)
An epoxy floor is not paint and it is not a sealer. It is a resin system bonded into concrete that has been mechanically ground open first, then built up in layers and finished with a clear topcoat. We have been installing epoxy floors across the Upstate since 1999.
We use 100% solids resin-based epoxy. The solids content is what stays on the slab once the floor cures, so a 100% solids epoxy holds the film thickness it was specified at rather than shrinking back as solvents flash off. That thickness is what carries the wear.
Every epoxy floor is specified for the room it goes in: the condition of the slab, the traffic it takes, and the finish you want. In Wade Hampton that usually means an older slab in an established neighborhood, or a retail or shop floor on Wade Hampton Boulevard.
Epoxy suits almost any interior concrete slab. In Wade Hampton that means basements and lower levels, workshops and outbuildings, laundry and storage rooms, and the shop and retail floors along Wade Hampton Boulevard.
A basement that takes foot traffic is not the same job as a shop floor with pallet trucks on it. We specify the epoxy system around the slab and its traffic.
Garages have their own requirements around vehicle weight, hot tires and automotive fluids, so they have a page of their own.
Garage flooring in Wade HamptonDecorative flake is our most popular epoxy system and the usual choice in homes. Acrylic flake is broadcast at 50 pounds per 500 square feet and sealed under a UV-resistant polyaspartic clear coat. It hides imperfections in the slab and leaves a naturally slip-resistant texture, which is worth having on a floor that sees wet shoes through the Upstate's rainy months.
Solid color epoxy is a single even color, hard-wearing, and a common choice for storage rooms, mechanical space and back-of-house commercial areas. Metallic epoxy moves pigment through the resin for a finish with depth, which suits interiors where the floor is on display.
For heavier duty we build from a moisture-tolerant penetrating primer and 100% solids epoxy, and can broadcast a quartz aggregate for extra grip. Those systems are USDA compliant.
A cured epoxy floor is seamless. There are no grout lines, no joints and no open pores, so spills sit on the surface instead of soaking in, and cleaning is a mop rather than a scrub.
Wear goes into the clear coat rather than the color coat beneath it, and the clear coat is the layer that can be refreshed years later without redoing the epoxy floor underneath. Flake and quartz finishes keep their grip when wet.
Maintenance is low but not nothing. Keep grit swept off, because grit under a boot or a tire is what abrades any epoxy floor, and red Upstate clay tracks in on every pair of shoes.
Preparation is where an epoxy floor is won or lost. We do a full mechanical prep by diamond grinding, which opens the concrete so the epoxy keys into the slab instead of sitting on the surface film left by an acid etch or a hardware-store kit. The grinders run under vacuum extraction, which keeps dust down inside a finished house.
Cracks and divots are repaired before anything is coated, and where moisture is a risk we start from a moisture-tolerant penetrating primer. The epoxy system then goes down in sequence: primer, base coat, flake broadcast where the system calls for it, then the polyaspartic clear coat. The install runs over two consecutive days.
.webp)
Wade Hampton is the built-out suburb between Greenville and Taylors, 9 square miles of Greenville County along US 29, which runs 5 miles southwest to the center of Greenville and 7 miles northeast to Greer. It had 9,793 housing units at the 2000 census and 9,912 at the 2020 census, so almost nothing here has been built in twenty years, and 21,482 people live in it.
That makes Wade Hampton a place of older slabs. The basements, workshops and laundry rooms in the established neighborhoods off Wade Hampton Boulevard sit on concrete poured decades ago, so the job more often starts with crack and divot repair and a moisture-tolerant primer than with a straight grind and coat. The retail and shop floors along the boulevard are the commercial side, and there the system is as often solid color or quartz as decorative flake. We look at the floor before quoting.
We are privately owned, started in 1999, and still locally owned and operated. Since then we have completed over 21,000 projects and installed more than 4 million square feet of floor coatings across South Carolina and western North Carolina, with more than 40 years of combined experience in 100% solids epoxy and polyaspartic systems.
Every epoxy floor carries a written lifetime warranty against peeling or debonding, and that warranty follows from the preparation.
Our showroom at 141 Highland Way in Taylors is next door, so you can see and handle the finishes rather than choose from photographs.
See the color chart.webp)
Tell us about the space and how it is used. We will assess the concrete, recommend an epoxy system, take you through colors and finishes, and give you an estimate.
Do you have a question, comment, or concern that wasn't addressed on the site? We want to hear from you!
High-performance, industrial-grade epoxy flooring for commercial properties that want to stand out with a safe walk on surface.
Industrial grade, chemical resistant epoxy floor coatings for the toughest industrial environments in South Carolina.
.webp)
.svg)