.png){kind=icon}
Carolina Flooring Specialists installs epoxy floor coatings for homes and businesses in Fountain Inn, SC: basements, workshops, laundry and storage rooms, retail floors and light industrial space, ground back to sound concrete and sealed under a UV-resistant polyaspartic clear coat.
.jpg)
%20copy.jpg)
An epoxy floor is not paint and it is not a sealer. It is a resin system bonded into concrete that has been mechanically ground open first, then built up in layers and finished with a clear topcoat. We have been installing epoxy floors across the Upstate since 1999.
We use 100% solids resin-based epoxy. The solids content is what stays on the slab once the floor cures, so a 100% solids epoxy holds the film thickness it was specified at rather than shrinking back as solvents flash off. That thickness is what carries the wear.
Every epoxy floor is specified for the room it goes in: the condition of the slab, the traffic it takes, and the finish you want. In Fountain Inn that is most often a newer house, so the decisions are usually about finish rather than repair.
Epoxy suits almost any interior concrete slab. In Fountain Inn that usually means basements and lower levels, workshops and outbuildings, laundry and storage rooms, and retail and light industrial floors.
Each is a different problem. A basement that takes foot traffic is not the same job as a shop floor under pallet trucks. We specify the epoxy system around the slab and its traffic.
Garages have their own requirements around vehicle weight, hot tires and automotive fluids, so they have a page of their own.
Garage flooring in Fountain InnDecorative flake is our most popular epoxy system and the usual choice in homes. Acrylic flake is broadcast at 50 pounds per 500 square feet and sealed under a UV-resistant polyaspartic clear coat. It hides imperfections in the slab and leaves a naturally slip-resistant texture, which is worth having on a floor that sees wet shoes through the Upstate's rainy months.
Solid color epoxy is a single even color, hard-wearing, and a common choice for storage rooms, mechanical space and back-of-house commercial areas. Metallic epoxy moves pigment through the resin for a finish with depth, which suits interiors where the floor is on display.
For heavier duty we build from a moisture-tolerant penetrating primer and 100% solids epoxy, and can broadcast a quartz aggregate for extra grip. Those systems are USDA compliant.
A cured epoxy floor is seamless. There are no grout lines, no joints and no open pores, so spills sit on the surface instead of soaking in, and cleaning is a mop rather than a scrub.
Wear goes into the clear coat rather than the color coat beneath it, and the clear coat is the layer that can be refreshed years later without redoing the epoxy floor underneath. Flake and quartz finishes keep their grip when wet.
Maintenance is low but not nothing. Keep grit swept off, because grit under a boot or a tire is what abrades any epoxy floor, and red Upstate clay tracks in on every pair of shoes.
Preparation is where an epoxy floor is won or lost. We do a full mechanical prep by diamond grinding, which opens the concrete so the epoxy keys into the slab instead of sitting on the surface film left by an acid etch or a hardware-store kit. The grinders run under vacuum extraction, which keeps dust down inside a finished house.
Cracks and divots are repaired before anything is coated, and where moisture is a risk we start from a moisture-tolerant penetrating primer. The epoxy system then goes down in sequence: primer, base coat, flake broadcast where the system calls for it, then the polyaspartic clear coat. The install runs over two consecutive days.
.webp)
Fountain Inn sits at the southern end of the Golden Strip, about 17 miles down I-385 from Greenville, with the city line straddling Greenville and Laurens counties. It has grown quickly: the population rose from 7,799 at the 2010 census to 10,416 at the 2020 census, a third more people in ten years, across 4,244 housing units. Most of the concrete we see here was poured inside that window.
That shapes the work. A newer slab is usually sound, so the epoxy job is a straightforward grind, prime and coat, and the conversation is about flake blends and finishes rather than repair. The exception is the older core along Main Street, where the town grew up around a stagecoach inn, and where a slab is more likely to need crack and divot repair before it is coated. We look at the floor before quoting either way.
We are privately owned, started in 1999, and still locally owned and operated. Since then we have completed over 21,000 projects and installed more than 4 million square feet of floor coatings across South Carolina and western North Carolina, with more than 40 years of combined experience in 100% solids epoxy and polyaspartic systems.
Every epoxy floor carries a written lifetime warranty against peeling or debonding. That warranty follows from the preparation, because bond failure is a preparation problem.
Our showroom at 141 Highland Way in Taylors is open if you would rather see and handle the finishes than choose from photographs.
See the color chart.webp)
Tell us about the space and how it is used. We will assess the concrete, recommend an epoxy system, take you through colors and finishes, and give you an estimate.
Do you have a question, comment, or concern that wasn't addressed on the site? We want to hear from you!
High-performance, industrial-grade epoxy flooring for commercial properties that want to stand out with a safe walk on surface.
Industrial grade, chemical resistant epoxy floor coatings for the toughest industrial environments in South Carolina.
.webp)
.svg)