Epoxy Flooring North Charleston SC

Carolina Flooring Specialists installs epoxy floor coatings for homes and businesses in North Charleston, SC: garages, workshops, laundry and storage rooms, retail floors and finished interiors, ground back to sound concrete and sealed under a UV-resistant polyaspartic clear coat.

Get a Quote (864) 630-5356

Epoxy Floor Coatings in North Charleston

An epoxy floor is not paint and it is not a sealer. It is a resin system bonded into concrete that has been mechanically ground open first, then built up in layers and finished with a clear topcoat. We have been installing epoxy floors across South Carolina since 1999.

We use 100% solids resin-based epoxy. The solids content is what stays on the slab once the floor cures, so a 100% solids epoxy holds the film thickness it was specified at rather than shrinking back as solvents flash off. That thickness is what carries the wear.

Every epoxy floor is specified for the room it goes in: the condition of the slab, the traffic it takes, and the finish you want. In North Charleston that specification is as often for a workshop or a warehouse as for a home.

Where an Epoxy Floor Works in a North Charleston Property

Epoxy suits almost any interior concrete slab. In North Charleston that usually means attached garages, workshops, laundry and storage rooms, and the warehouse, workshop and retail floors in the city's commercial and industrial buildings.

Each is a different problem. A workshop slab that takes tools and traffic is not the same job as a retail floor under lights. We specify the epoxy system around the slab and its traffic.

Garages have their own requirements around vehicle weight, hot tires and automotive fluids, so they have a page of their own.

Garage flooring in North Charleston

Get a Quote

(864) 630-5356

Epoxy Systems and Finishes

Decorative flake is our most popular epoxy system and the usual choice in homes. Acrylic flake is broadcast at 50 pounds per 500 square feet and sealed under a UV-resistant polyaspartic clear coat. It hides imperfections in the slab and leaves a naturally slip-resistant texture, which is worth having on a floor that sees wet shoes for most of the year.

Solid color epoxy is a single even color, hard-wearing, and a common choice for storage rooms, mechanical space and back-of-house commercial areas. Metallic epoxy moves pigment through the resin for a finish with depth, which suits interiors where the floor is on display.

For heavier duty we build from a moisture-tolerant penetrating primer and 100% solids epoxy, and can broadcast a quartz aggregate for extra grip. Those systems are USDA compliant.

Metallic epoxy floor coating in Greenville SC

What an Epoxy Floor Is Like to Own

A cured epoxy floor is seamless. There are no grout lines, no joints and no open pores, so spills sit on the surface instead of soaking in, and cleaning is a mop rather than a scrub.

Wear goes into the clear coat rather than the color coat beneath it, and the clear coat is the layer that can be refreshed years later without redoing the epoxy floor underneath. Flake and quartz finishes keep their grip when wet.

Maintenance is low but not nothing. Keep grit swept off, because grit under a boot or a tire is what abrades any epoxy floor, and sand travels indoors on a coast.

Preparation: Why Epoxy Floors Last or Fail

Preparation is where an epoxy floor is won or lost. We do a full mechanical prep by diamond grinding, which opens the concrete so the epoxy keys into the slab instead of sitting on the surface film left by an acid etch or a hardware-store kit. The grinders run under vacuum extraction, which keeps dust down inside a finished house.

Cracks and divots are repaired before anything is coated, and where moisture is a risk we start from a moisture-tolerant penetrating primer. The epoxy system then goes down in sequence: primer, base coat, flake broadcast where the system calls for it, then the polyaspartic clear coat. The install runs over two consecutive days.

Epoxy Flooring for North Charleston Properties

North Charleston sits on the coastal plain between the Ashley and Cooper rivers, just north of Charleston. The ground and the climate are the Lowcountry's: a high water table, rain in every month, and long humid summers. A slab at grade can carry enough moisture to matter, so a moisture-tolerant penetrating primer is a normal part of an epoxy specification here.

What sets North Charleston apart is how much of its concrete is commercial and industrial. The city holds the former Charleston Naval Base, a truck engine parts plant, port facilities, and one of only three places in the world where wide-body airliners are assembled. Around that sit 50,563 housing units at the 2020 census. So an epoxy job here is as likely to be a warehouse or workshop floor as a garage, and the system follows: quartz aggregate and USDA compliant builds on the commercial side, flake in the home. We look at the floor before quoting.

Why North Charleston Property Owners Choose Carolina Flooring Specialists

We are privately owned, started in 1999, and still locally owned and operated. Since then we have completed over 21,000 projects and installed more than 4 million square feet of floor coatings across South Carolina and western North Carolina, with more than 40 years of combined experience in 100% solids epoxy and polyaspartic systems.

Every epoxy floor carries a written lifetime warranty against peeling or debonding. That warranty follows from the preparation, because bond failure is a preparation problem.

Our showroom at 141 Highland Way in Taylors is open if you would rather see and handle the finishes than choose from photographs.

See the color chart

Get an Epoxy Flooring Quote in North Charleston

Tell us about the space and how it is used. We will assess the concrete, recommend an epoxy system, take you through colors and finishes, and give you an estimate.

Get a Quote

(864) 630-5356